Lift Station Treatment
Fats, oil and grease accumulate in wastewater lift stations, increasing maintenance costs, manpower requirements and related workplace risk.
The Natural Solution: Biofeed FS®
This advanced BESTechnologies grease remediation system saves clients money by virtually eliminating fats, oil and grease (FOG) at lift stations. The BESTech system helps wastewater operators reduce maintenance costs and potential fines from regulators with an all-natural approach that actually consumes FOG, instead of just moving it down the line. Reducing maintenance also means fewer workers are required on-site, limiting workplace risk.
BESTech Biofeed LS® (Lift Station) Dispenser – Part #8236
BESTech Biofeed LS® (Lift Station) Dispenser
This weather resistant Dispenser is installed near a lift station and dispenses our Part # 8303 BioFeed LS/TP (depending on the severity of the problem).
The BESTech Biofeed LS System dispenses live, vegetative bacteria to soften and degrade FOG. The by-products of BESTech’s true remediation process are carbon dioxide and water. The system is proven in Lift Stations pilot programs with municipalities from Florida to California.
Biofeed LS uses a 55-gallon reservoir of high-density bacteria cultures, dispensed through a corrosion resistant spraying system mounted within the wet well. Through the use of this system, grease accumulates more slowly on wet well walls and equipment, while floating grease is reduced as well. Experience shows that Biofeed LS can significantly reduce lift station maintenance. Since caustic chemicals are virtually not needed to clean the stations, float balls, pumps and other lift station components last longer, lowering operating costs.
Contact our knowledgeable sales staff for your facility’s needs and start saving now on lift station maintenance.
BioFeed LS/TP – Part #8303
(makes 14-gallons of Dosing Material – enough to last from 15 – 30 days when dispensed by our Lift Station or Treatment Plant (Part # 8236 or # 8237 Dispensers).
Part # 8303
BioFeed LS/TP (as well as Part # 8304 BioFeed LS/TP, and Part # 8305 BioFeed LS/TP) is suitable for use in either the Part # 8236 Lift Station Dispenser or Part # 8237 Treatment Facility Dispenser. Since no two needs are the same, you can customize each installation to fit the need, whether by programming or dispensing less volume, thereby gaining the greatest possible benefit at the least possible cost.
One thing to keep in mind is to always program the dispenser to consume all the product, whether it be 14, 27 or 55 gallons, within 30 days after it is hydrated.
We are always available to assist you toward arriving at the most suitable solution.
BioFeed LS/TP – Part #8304
(makes 27-gallons of Dosing Material – enough to last from 15 – 30 days when dispensed by our Lift Station or Treatment Plant (Part # 8236 or # 8237 Dispensers).
BioFeed LS/TP – Part #8305
(makes 55-gallons of Dosing Material – enough to last from 15 – 30 days when dispensed by our Lift Station or Treatment Plant (Part # 8236 or # 8237 Dispensers).
Contact Us About This Product
Fill out the form below to let us know your questions or to get pricing about this product.